Showing posts with label 3D printing. Show all posts
Showing posts with label 3D printing. Show all posts

Weekend fun with 3D prints

| |
Guess what I m doing this weekend? A little hint:

3dprints for upcoming real brooches

Got a box full of goodies from Shapeways containing 3d prints of some of my Brooch a a Week designs. Some are from early designs, some newer. I am starting to get a feel for what prints well in the low resolution cheaper nylon material. I think this time I only had one model rejected by them for not being printable in that material. Usually there is a little part too small to print requiring remodelling (which I often don't have time for). Or I would have to opt for the more expensive high resolution polymer prints. But I am trying to keep the cost in check since this is just a fun project and not generating sales.

So this weekend I will play with some of these and try to attach brooch findings in some way or the other to make them wearable. Should be fun.

Here a few in more closeup:

Conical Pavilions pattern 3D prints

3d prints in white and coral red nylon of BAD-42 and simple variations of BAD-53/54. Those printed patterns look pretty. They will make nice little brooches. Think I need to send out the others from that pattern series too.


hex20-24

These are 3d prints from my virtual BAD-10 to 24 "Hex Space Rails" 
Those came out better than expected, except maybe the dense version on the upper right. Clearly they print better if there is some space between those rails, otherwise the material just smooches together to one big blob since it's the low resolution white nylon plastic. Now I need to figure out how to attach a brooch pin of some sort.Not an easy one with these. Right now I am drawing a blank here, but I am sure something will enlighten me if I stare at it long enough.


So other than that little fun project I am also planning to work a bit more on my new website (still have to add ton's of products) and check out the Abbot Kinney festival in Venice on Sunday. Plus a little bit of landscaping in my yard is in order, maybe a bike ride to the ocean too and buying fresh veggies at the farmers market.

Brooch A Day, Week 2 Catchup

| |
I took a look through my Flickr set of all my brooches so far for the Brooch a Day challenge and realized that I actually never updated the blog with the process. Time to play catch up and go back in time.

Week 2 did not have any Grasshopper programming work involved. It was all about learning more about brooch mechanism as I have never done any brooches before. I used some objects I had laying around and made them into brooches.
It came in handy that I had some failed 3D prints on hand from earlier design explorations for bracelets. This keeps it still somewhat related to the original intend of using CAD process for some of the brooch making.

Brooch #9 The Wheel Brooch




Those are 3D printed stainless steel miniature bracelets  on my brooch #8 magnetic pin.
I accidentally messed up the scale of these bracelet designs and they are only 1/2 the size (35mm diameter). Too small for any human hand, maybe it would fit a doll.  Rookie mistake in the virtual CAD world ;-) But perfect size for some brooches. Since they are just holding on by magnetic power the arrangement is flexible. 


BAD-009 Wheel Brooch
BAD-009 Wheel Brooch



Brooch #10 Bumpy Rail Brooch



BAD-010 Bumpy Rail Brooch
BAD-010 Bumpy Rail Brooch, back side

One of those accidentally 1/2 sized bracelets that could be napkin holders or, well, a brooch.
3D printed stainless steel, modeled in Rhino/ T-splines. Stainless steel brooch pin and catch welded to ring. Testing out my PUK stainless steel welding settings with these brooches too. Stainless steel welds pretty nicely. The PUK even has a pre-settings for that material. Makes it easy.

Brooch #11 Rilled Pin


BAD-011 Rilled Pin BAD-011 Rilled Pin BAD-011 Rilled Pin

In this one I was using a 3d printed stainless steel bead I had designed earlier in Rhino3D/ T-splines. Perfect for a brooch design. I made a little "flower" bouquet out of some sterling silver head pins and added a thicker wire as the stem. Sterling silver was then oxidized. The 3D printed stainless steel bead is 23mm long, 12mm diameter.


Brooch #12 Rilled Slider Brooch


BAD-012 Rilled Slider Brooch BAD-012 Rilled Slider Brooch

One more of these rilled 3D printed stainless steel bead. Here it slides and spins freely on a steel pin, which is tension set in a welded stainless steel frame. The frame was all welded with the PUK welder. As a brooch mechanism I used some SST tubing, formed catch from sheet and bent SST wire into a double pin.


BAD-012 Rilled Slider Brooch back


The next brooch deserves it's own post. There was no CAD involved at all. But it will be the inspiration for the next weeks Grasshopper practice designs.

Brooch A Day - Printed Steel Rosettes

| |
The first month of the year is almost done and the brooch a week challenge has been fun so far. Last week I finally received the 3D printed week 1 rosette models from Shapeways.
It's always interesting to see the printed outcome. I did add some pins to the back to be able to wear them as brooches and pin them to the large canvas I hung up on the wall. It will be so much fun seeing all those hundreds of brooches on that canvas at the end of the year. Walking by that canvas everyday keeps me on track and serves as an instant inspiration board.

The design process via Rhino3D and Grasshopper modelling was explained in the last post.
All (except the Anemone Rosette design) were printed in bronze infused stainless steel which has always a nice texture from the printing process.

BAD-001 3D printed Rosette Brooch
BAD-001 Rosette 3D printed stainless steel, 32mm diameter, 3mm thick, designed in Rhino3D and Grasshopper

BAD-001 3D printed Rosette Brooch_9633
BAD-002 Rosette with denser elliptical shapes
To test I also had these 2 rosettes printed a bit larger in the smooth plastic material (polished white plastic and a set in coral red). But the details don't come out well with that material, expesially for the denser design on the right. The shapes have no refinement and bleed too much into each other. It seems to work better if there is some empty space around the printed sections (see at the end of the post below). BTW: the coral red does not look red to me but rather hot pink. It certainly gets some attention.

BAD-001 & BAD-002 3D printed Rosette Brooch
BAD-001 and 002 printed in laser sintered nylon plastic dyed coral red, nickel pin in back, 43mm diameter each

Looking at the printed circle brooches it's apparent that the detail on the printed steel can't match the detail I get from milling in wax. But neverless it's quite interesting.

BAD-004 Circle Rosette 3D printed
BAD-004  Circle Rosette Brooch: 3D printed stainless steel, 30mm diameter, 3mm thick

BAD-003 & 004 Circle Rosettes 3D printed
BAD-003 & 004 Circle Rosettes

BAD-005 Pyramid Rosettes, 3D printed
BAD-005 two versions of the Pyramid Rosette brooch in steel
BAD-007 Daisy Rosette, 3D printed
BAD-007 Daisy Flower Brooch in steel
BAD Brooch rosettes week 1, 3D printed stseel
All printed stainless steel rosettes
I knew the "tentacles" of the anemone rosette (BAD-006) would be too thin for the steel printing. I did have it print in the coral red plastic instead. This allowed me to print with a larger larger diameter and more height without getting it too heavy and being so expensive. The stainless steel printing can get quite costly, I have to say. I think I will switch more to the plastic versions where appropiate. Otherwise I will be broke making 352 brooches in steel.

BAD-006 Rosette Anemone front, 3D printed Plastic
Anemone rosette, laser sintered nylon plastic,  dyed coral red for some more craziness, 41mm diameter, 15mm high

BAD-006 Rosette Anemone side, 3D printed Plastic
The depth it pretty nice.

BAD-006 Rosette Anemone back, 3D printed Plastic
Back side with stainless steel pin

This weekend I have to make the printing files for the models from the last 2 weeks and send them off to Shapeways for printing. At least now I have a better feel for some of the material properties.


.
Related Posts with Thumbnails